English 
日本語 
français 
Español 
русский 
português 
العربية 
tiếng việt 
हिंदी 
বাঙালি 
The installation of the distribution box is related to the daily control of the home circuit. The following FUTINA will take you to understand the installation method of the household distribution box.
01
Disassemble the box.
02
Take out the rails.
03
Put the box into the hole.
04
Fix the cabinet to the wall, use four screws to install at the four corners, or use two screws to install at the opposite corners, just make sure it is fixed.
05
Install the leakage protector on the rail and wire it.
06
Clamp the guide rail into the cabinet. It should be noted here that the screws do not need to be tightened, and are only used for slight fixing. The last step is to fix it, which is convenient for adjustment.
07
Install the panel and secure the panel with panel screws.
08
Then adjust the horizontal direction of the panel, and then tighten the screws just pre-tightened to complete the installation!
Finally, pay attention to the safety of electricity use, it is recommended to find a professional electrician for installation.
Other Recommended Products From Futina
